Spec your filter
A request for quote for a bandpass filter, built from the questions a supplier asks: center wavelength and tolerance, bandwidth, blocking, beam geometry, mechanics, environment, quantity and documents. The required optical density, the angle and cone shifts and the thermal window are computed from the entries and printed on the sheet.
Request for quote: bandpass filter
| Specification | Value | Condition | Note |
|---|---|---|---|
| Angle of incidence | 0° | Chief ray at the filter | |
| Beam at the filter | Collimated | ||
| Polarization | Unpolarized | Specs apply to the average of s and p | |
| Mounting | Mounted in a ring | ||
| Substrate | Supplier's choice | ||
| Surface quality | 60-40 | Scratch-dig, over the clear aperture | |
| CWL temperature coefficient | 5 pm/K | Value used in the checks; supplier to confirm |
Open questions for the supplier
None from the computed checks.
Documents requested
No documents selected.
Start with a free review of your technical content
Get a one-page comparison of your technical content with two competitors, three recommended documents or tools, and a price for the first project.